![](https://www.daemon3dprint.com/media/.renditions/wysiwyg/ador1920x575.png)
![](https://www.daemon3dprint.com/media/.renditions/wysiwyg/DSC03786_.jpg)
![](https://www.daemon3dprint.com/media/.renditions/wysiwyg/1DSC03454_.gif)
![](https://www.daemon3dprint.com/media/.renditions/wysiwyg/adormodules1920x575.png)
![](https://www.daemon3dprint.com/media/.renditions/wysiwyg/DSC03880_.jpg)
![](https://www.daemon3dprint.com/media/.renditions/wysiwyg/air_assist.jpg)
![](https://www.daemon3dprint.com/media/.renditions/wysiwyg/DSC02665_.jpg)
![](https://www.daemon3dprint.com/media/.renditions/wysiwyg/DSC04140_.jpg)
![](https://www.daemon3dprint.com/media/.renditions/wysiwyg/2Wengrave-1.jpg)
Ador
Meet FLUX Ador, the world's first colour-printing laser cutter. Powered by three high-quality, interchangeable modules, Ador enables you to engrave and cut through a wide range of materials while enhancing your projects with a pop of colour.
- 10/20W Laser
- Work Area: 430 x 300
![](https://www.daemon3dprint.com/media/.renditions/wysiwyg/ador_thin.png)
Beamo
This is the newest and smallest CO2 laser cutter in the range, which is suitable for any small business, school, or personal home use.
- 30W Laser
- Work Area: 300 x 210 mm
- Camera Preview Area: 30 x 19.5 cm
- Dimensions: 17 x 62 x 45 cm
- Compatible with an Auto Focus Module for ease of use
Beambox
The Beambox is a step up from the Beamo, and lets you cut deeper through materials like wood, leather, acrylic, and cardboard.
- 40W Laser
- Work Area: 40 x 37.5 x 8 cm
- Camera Preview Area: 40 x 36 cm
- Dimensions: 25 x 83 x 67 cm
![](https://www.daemon3dprint.com/media/wysiwyg/beambox.png)
![](https://www.daemon3dprint.com/media/wysiwyg/beambox_pro.png)
Beambox Pro
The Beambox Pro is the biggest and most powerful machine in the range and therefore can engrave and cut deeper into more stubborn materials.
- 50W Laser
- Work Area: 60 x 37.5 x 8 cm
- Camera Preview Area: 60 x 36 cm
- Dimensions: 25 x 103 x 67 cm
HEXA
FLUX HEXA’s bigger and deeper working area is specially built for your professional production. High resolution combined with a faster engraving speed is making your working experience run as smoothly as ever. More capacity, more possibilities.
- 60W Laser
- Work Area: 730 x 410 x 125 mm
Beamair Filter
The BeamAir Filter will filter all the air that comes out of your Flux machine and can easily be installed on your Beamo, Beambox or Beambox Pro. The Flux BeamAir is a necessary part for Flux's laser cutter and engravers.
- Compatible with the Beamo, Beambox and Beambox Pro
- Guaranteed clean and safe work and a safe working environment
- Sucks up dust and gases and filters out odours produced during machining
- Necessary Flux spare part
Materials
Engraving |
Cutting (1st cut) |
||||
All Models | Beamo | Beambox | Beambox Pro | HEXA (new) | |
Cardboard: | ✓ | 2mm | 3mm | 4.5mm | 7mm |
Wood: | ✓ | 3mm | 5mm | 8mm | 10mm |
Leather: | ✓ | 1mm | 2.5mm | 4mm | 6mm |
Acrylic: | ✓ | 3mm | 5mm | 8mm | 10mm |
Rubber: | ✓ | X | X | X | X |
Glass: | ✓ | X | X | X | X |
Stone: | ✓ | X | X | X | X |
Cement: | ✓ | X | X | X | X |
Anodised Steel: | ✓ | X | X | X | X |
Stainless Steel: | ✓ | X | X | X | X |
Spares & Add On's
Software, Firmware & Data Sheets
All Machines
> Software & Firmware for Your Machine
> Software & Firmware Download Information
Beamair 2.0
Gallery
| Flux Laser Cutters
Talk to an expert or get a Laser machine demo local to you.
![](https://www.daemon3dprint.com/media/wysiwyg/beamo-5_2.png)
Resellers
Our Resellers are available if you would like to arrange a Flux machine demo and talk to a product expert. Our Resellers are regionally based, so we hope there will be one near you. Not only are our Resellers sales outlets for the Flux Laser Cutter range of machines, but many of them also use the machines to make parts of their wider product portfolio, so you will get real insight into the daily use of the machines from them.