DeltaWasp Spitfire Heater Cartridge
The DeltaWasp Spitfire Heater Cartridge is easy to replace, for High Temperature (to 350°C) and Low Temperature (280°C) materials and nozzle size options of 0.4mm, 0.7mm and 1.2mm.
Spare/Replacement DeltaWasp Spitfire Heater Cartridge for your DeltaWasp Spitfire Extruder - Black & Red. This improved and simpler extruder has an easy change system for the Heater Cartridge, so that you can swap between the LT (280°C) and HT(350°C) and nozzle sizes from 0.4 mm to 1.2mm as you need to run different materials and resolutions.
The Spitfire system incorporates an easily removable heater cartridge composed of a coupler, barrel and nozzle, the whole unit is installed and removed by a quarter turn screw. There are two DeltaWasp Spitfire Heater Cartridge types, one with a steel barrel for high temperature (350°C) materials, the other with a standard teflon barrel for lower temperature materials (280°C), and three nozzle sizes, 0.4mm. 0.7mm and 1.2mm.
RM 48 shipping rule | No | ||
---|---|---|---|
Technical Specifications | Tech Specs
|
What's in the Box
- 1 x DeltaWasp Spitfire Heater Cartridge